Sharing your Internet connection to multiple systems will be much easier
with the new Cisco 876W Wireless Router. With this router you can share the connection very quickly without any loss. This wireless router comes with dimensions of (W) 26cm x (D) 23.2cm x (H) 5.1cm.
Main specs
Installed RAM capacity of this Cisco 876W Wireless 54 Mbps Router is 128 MB. Supported flash memory of the unit is 24 MB. Though it is a wireless router it also supports wired connection. Router includes 4-port switch in it and you can take 4 connections at a same time. Data transfer rate of this model is 54 Mbps and the frequency band of the unit is 2.4 GHz. Framing format of the device is ANSI T1.413. Data link protocol is ANSI T1.413 and the switching protocol is Ethernet.
The external detachable antenna helps in capturing the signal very quickly. Interface supported is 4 x networks – Ethernet 10Base-T/100Base-TX – RJ-45, 1 x modem – ISDN BRI ST – RJ-45 (WAN), 1 x network – Radio-Ethernet and 1 x management – console – RJ-45. Minimum operating temperature of this router is 0 °C and the maximum is 40 °C. Gain level of this router is 2.2dBi. Voltage required is AC 120/230 V and the power provided is 26 Watt. All these outstanding features are very cost effective.
The special features supported by this Cisco wireless router include Firewall protection, DHCP support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), manageable, IPv6 support and Intrusion Prevention System (IPS).
| General Features | |
|---|---|
| Brand | Cisco |
| Model | Cisco 876W Wireless Router |
| Cable connection | Yes |
| Data transfer speed | 54 Mbps |
| Interfaces | 4 x network – Ethernet 10Base-T/100Base-TX – RJ-45, 1 x modem – ISDN BRI ST – RJ-45 ( WAN ), 1 x network – Radio- Ethernet, 1 x management – console – RJ-45 |
| Number of network ports | 4 |
Related posts: